You are hereHome>products

  • Tel:+86-21-58380935
  • Fax:+86-21-58380936
  • Mobile:+86-13918981620
  • E-mail:sheenvivian@hotmail.com

Jaw Crusher

Technical data:

Model Feed Opening Size
(mm×mm)
Max. Feed Size(mm) Capacity
(t/h)
Eccentric Shaft RPM(r/min) Motor Power
(kw)
Discharge Opening Range(mm) Weight
(t)
PE-250×400 250×400 210 5-20 300 15 20-60 2.8
PE-400×600 400×600 340 16-65 275 30 40-100 6.5
PE-500×750 500×750 425 45-100 275 55 50-100 10.1
PE-600×900 600×900 500 50-120 250 55-75 65-160 15.5
PE-750×1060 750×1060 630 52-180 250 110 80-140 28
PE-800×1060 800×1060 650 85-143 250 110 100-200 30
PE-870×1060 870×1060 670 181-210 250 110 200-260 30.5
PE-900×1200 900×1200 750 140-260 200 110 95-165 50
PE-1000×1200 1000×1200 850 160-300 200 110 195-265 51
PE-1200×1500 1200×1500 1020 300-600 180 160 150-300 100.9
PEX-250×750 250×750 210 8-22 330 22 25-60 4.9
PEX-250×1000 250×1000 210 16-52 330 30-37 25-60 6.5
PEX-250×1200 250×1200 210 20-60 330 37 25-60 7.7
PEX-300×1300 300×1300 250 20-90 330 55 20-90 11
Jaw Crusher

1. Stable performance

2. High reduction ratio

3. Fine finished products

4. Simple structure

5. Easy to maintain

6. Low operating cost

Introduction:Despite that the jaw crusher has been developed for many years, it is still widely used in fields of metallurgy, mining, chemical, construction, fireproof material, ceramics industry because of its simple structure, solidity, reliability, easy maintenance. It can be used to crush rocks with a fracture strength within 147-245MPa into coarse/medium/fine size. 
        In order to meet the requirement of high crushing ratio and hardness of low carbon ferrochrome in fields of metallurgy, mining and construction nowadays, we have designed modern Jaw crusher.

Features:1. All kinds of model available 2. Stable and reliable operation 3. High reduction ratio 4. Uniform-sized finished products 5. Easy to maintain 6. Low operating cost 7.Deep crushing chamber 8.Wide size range of discharging opening 9. The machine has a better performance with the hydraulic coupling.

Composition:It comprises the frame, the eccentric shaft, the grooved wheel, the flywheel, the mobile jaw, the side plate, the toggle plate, the captured spring, the fixed jaw plate and the mobile jaw plate, the safety device and the adjusting device, etc.

Working principle:The motor drives the belt and the grooved wheel, and then makes the jaw move up and down through the eccentric shaft. When the jaw moves upwards, the angle between the liner plate and the jaw becomes larger, which will push the mobile jaw plate close to the fixed jaw plate, during which the material is crushed. When the mobile jaw moves downwards, the angle between the liner plate and the mobile jaw becomes smaller. The mobile jaw plate will leave the fixed jaw plate under the force the rod. The crushed material will drop from the discharge opening. With the motor rotating continuously, mass production can be realized.

Use:This series of crushers can be used in fields of metallurgy, mining, chemical, cement, construction, fireproof materials, and ceramics industries. It is specially designed to crush all kinds of ores with fracture strength under 300MPa.

Request a quotation:

Your Name: *
Your Email: *
Country: *
Contact Tel: *
Company:
Application: For Construction (like concrete, highway, railway, brick, building, etc)
For Mining ( like gold, copper, Iron ore beneficiation or nonmetal beneficiation, etc)
Equipment: Crusher Ball Mill Other mills Feeder Conveyor Screen Beneficiation Equipments
Detailed Requirements:
(like raw materials name, capacity in TPH, output size like 0-10,10-15, 15-20 mm for crushing or 75 microns ( 200 meshes) for mill machine and other requirements)